| Models |
NSM-205PF Series |
| Technology |
| Standards |
IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| Processing Type |
Store & forward; wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
3.2 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Ethernet Interface |
| RJ-45 Ports |
10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators |
Power, Link/Act, Power Device is detected |
| Ethernet Isolation |
1500 Vrms 1 minute |
| +/-4 kV ESD Protection |
Yes |
| Fiber Interface (100 Base-FX; SC/ST type) |
| Multi-Mode |
NS-205PFT/FC |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm |
| NSM-205PFT/FC |
Distance: 2 km, (62.5/125 μm recommended) for full duplex |
| NS-205PFT-24V/FC-24V |
Wavelength: 1300 or 1310nm |
| NSM-205PFT-24V/FC-24V |
Min. TX Output: -20 dBm |
| Max. TX Output: -14 dBm |
| Max. RX Sensitivity: -32 dBm |
| Min. RX Overload: -8 dBm |
| Budget: 12 dBm |
| Single-Mode |
NS-205PFCS |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm |
| NSM-205PFCS |
Distance: 30 km, (9/125 μm recommended) for full duplex |
| NS-205PFCS-24V/FCS-24V |
Wavelength: 1300 or 1310nm |
| NSM-205PFCS-24V/FCS-24V |
Min. TX Output: -15 dBm |
| |
Max. TX Output: -8 dBm |
| |
Max. RX Sensitivity: -34 dBm |
| |
Min. RX Overload: -5 dBm |
| |
Budget: 19 dBm |
| Single-Mode |
NS-205PFCS-60 |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm |
| NSM-205PFCS-60 |
Distance: 60 km, (9/125 μm recommended) for full duplex |
| NS-205PFCS-60-24V /FCS-60-24V |
Wavelength: 1300 or 1310nm |
| NSM-205PFCS-60-24V/ FCS-60-24V |
Min. TX Output: -5 dBm |
| |
Max. TX Output: 0 dBm |
| |
Max. RX Sensitivity: -35 dBm |
| |
Min. RX Overload: -5 dBm |
| |
Budget: 30 dBm |
| Power Input |
| Input Voltage Range |
+46 ~ +55 VDC for PoE output |
| Power Consumption |
0.08 A @ 48 VDC without PD loading; |
| 1.5 A @ 48 VDC with PD full loading |
| Protection |
Power reverse polarity protection |
| +/-4 kV ESD Protection |
Yes |
| Connection |
3-Pin Removable Terminal Block |
| PoE Technology |
| PoE Compliance |
100% IEEE 802.3af compliant |
| PoE Classification |
PSE (Power Sourcing Equipment) |
| PoE Voltage |
+48 VDC depending on power input |
| PoE Voltage |
Up to 15.4 watts per channel |
| PoE Operation |
Automatic detection and power management |
| PoE Pin assignments |
V+ (Pin 1,2), V- (Pin 3,6) |
| PoE disconnect mode |
DC disconnect |
| Mechanical |
| Casing |
Metal (IP30 Protection) |
| Dimensions (W x L x H) (Unit: mm) |
25 x 168 x 119 |
| Installation |
DIN-Rail Mounting |
| Environment |
| Operating Temperature |
-30 °C ~ +75 °C |
| Storage Temperature |
-40 °C ~ +85 °C |
| Ambient Relative Humidity |
10% ~ 90% RH, non-condensing |
