FCM-MTCP

Support Modbus/TCP communication protocol at Ethernet port.
●	Support DI/DO/AI/AO/Counter/Frequency modules
●	Support HART protocol
●	Support redundant communication and power modules
●	Supports redundant I/O modules
●	I/O configurable via the Ethernet (Using the iDCS-8830 Utility)
●	Supports Hot-swap and auto configuration
●	Supports power on value and safe value for analog/digital output module
●	Allows maximum of 4 clients access simultaneously
●	Maximum 255 digital I/O in one iDCS-8830
●	Maximum 64 analog output in one iDCS-8830
●	Maximum 128 analog input in one iDCS-8830
●	Maximum 128 analog input in one iDCS-8830

CPU module
CPU	80186 or compatible (16-bit and 80MHz)
SRAM	512KBytes
Flash	512 KB; Erase unit is one sector (64K bytes); 100,000 erase/write cycles.
EEPROM	16 KB
	Data retention: 40 years; 1,000,000 erase/write cycles.
64-bit Hardware Serial Number	Yes
Built-in Watchdog Timer	Yes (0.8 second)
Short Circuit Protection	Yes
Power-on Value	Yes, Programmable
Safe Value	Yes, Programmable
Communicate Interface
COM 1	RS-232 (to update firmware)
CAN Port	Internal communication with the CAN I/O modules
Ethernet Port	10/100Base-TX Ethernet Controller
	(Auto-negotiating, Auto_MDIX, LE indicator)
I/O Expansion Slots
Slot Number	8
Hot Swap	Yes
Auto Configuration	Yes
Power
Protection	Power reverse polarity protection
Isolation	1 kV
Power requirement	+10 ~ +30 VDC
Power supply	40 W
Mechanical
Dimensions (W x L x H)	374 x 132 x 100 mm
Installation	DIN-Rail or Wall Mounting
Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10~ 90%, Non-condensing

iDCS-8830

Intelligent Remote Redundant Ethernet I/O expansion unit including 1 power modules(FPM-D2440), 1 communication modules(FCM-MTCP)

KA-52F	AC100~250V input, DC 24V/1A output, flat type power supply
DIN-KA52F	KA-52F with DIN-Rail mount
DP-665	AC 85 ~ 270 V input, DC 24V/1.7A and 5V/0.5A output power supply
DP-660	24 V/1.7 A, 5 V/0.5 A Power Supply
DP-1200	24V/5A Power Supply